a. |
the minimum Site area shall be 250.8 m2. |
b. |
the minimum Site Width shall be 10 m. |
c. |
The Front Setback shall be a minimum of 3.0 m and shall be consistent within 1.5 m of the Front Setback on Abutting Lots. Where an Abutting Lot is vacant, the vacant Lot shall be deemed to have a Front Setback of the next Abutting Lot. |
d. |
The minimum Rear Setback shall be 40% of Site Depth. |
|
i. |
Site depth for Area “A” shall be measured as the longest distance from the Front Lot Line to the Rear Lot Line. |
|
e. |
Side Setbacks shall total at least 20% of the Site Width, with a minimum Side Setback of 1.2 m on each side. |
f. |
Maximum Site Coverage shall be 190 m2 |
g. |
The maximum Height shall not exceed 8.9 m. |
h. |
The Basement elevation shall be no more than 1.5 m above Grade. The Basement elevation shall be measured as the distance between Grade and the finished floor of the first Storey. |
i. |
Where an interior Side Setback is less than 2.0 m: |
|
i. |
the applicant shall provide information regarding the location of side windows of the Dwellings on the Abutting properties and Amenity Areas on Abutting properties; |
ii. |
the side windows of the proposed Dwelling shall be located to reduce overlook into Amenity Areas of the Abutting properties; and |
iii. |
the proposed Dwelling shall incorporate design techniques, such as, but not limited to, translucent window treatment, window location, raised windows, or Privacy Screening, to reduce direct line of sight into the windows of the Dwelling on the Abutting property. |
|
j. |
Platform Structures located within a Rear Yard or interior Side Yard, and greater than 1.0 m above the finished ground level, excluding any artificial embankment, shall provide Privacy Screening to prevent visual intrusion into Abutting properties. |
k. |
Platform Structures or single Storey Unenclosed Front Porches may project from the first Storey of a Dwelling a maximum of 2.5 m into a required Front Setback, provided that a minimum of 3.0 m is maintained between the Front Lot Line and the Platform Structure or Unenclosed Front Porch. |
l. |
Platform Structures or single Storey Unenclosed Front Porches may project from the first Storey of a Dwelling a maximum of 2.0 m into a required flanking Side Setback, provided that a minimum of 1.5 m is maintained between the flanking Side Lot Line and the Platform Structure or Unenclosed Front Porch. |
m. |
A minimum distance of 1.2 m shall be maintained from one Side Lot Line to the outside wall of all projections from the first Storey. |
n. |
A principal building shall have a least one entrance door or entrance feature facing a public roadway, other than a Lane. |
o. |
To improve architectural interest of the principal structure(s), design techniques such as variations in roof lines, use of different exterior finishing materials, articulation of building Façades, or varied architectural designs shall be used on all Façades facing a public roadway, other than a Lane. |
p. |
Identical or mirrored front elevations shall not be located on Abutting Sites. Development shall include a variety of finishing materials, or design elements such as varied roof lines, entry features, or variation in window and door placement. |
q. |
Regardless of whether a Site has existing vehicular access from a public roadway, other than a Lane, no such access shall be permitted to continue where an Abutting Lane exists. |
r. |
Rear attached Garages shall not be allowed. |
s. |
A maximum of one principal building shall be allowed. |
t. |
Signs shall comply with the regulations of Schedule 59A of this Bylaw. |
u. |
Trees and shrubs shall be provided in accordance with the following: |
|
i. |
A minimum of one deciduous tree, one coniferous tree and four shrubs shall be required. |
|